skip to content

Interested in what more we have to offer?
Click here to join our mailing list
BSI logo BBA logo
build green | build for life

Technical HelpTechnical Help

General



When working on gutters or fascias at height it is advisable to use scaffolding in preference to ladders. If you are using a ladder please take the following points into consideration: (These points are for guidance only)

  1. Ensure the ladder is based on level ground, preferably not soil or grass. If the ladder is based on soil or grass then place a board beneath the legs to spread the load and prevent sinking.
  2. If possible, tie the top of the ladder to ring bolts at eaves level. Before fitting pipes/gutters, ensure that all pieces have been primed and painted, including all cut ends to prevent corrosion. If any pipes/gutters have been cut/drilled, ensure that there are no loose filings on the system as these will quickly discolour the product.
  3. We strongly recommend that you do not work alone. Removal and installation of cast iron guttering generally requires two people.

Before replacing an existing system it is advisable to inspect and repair fascia and wall faces before beginning a new installation. All fascias must be in good condition before new guttering is installed as the weight of the cast iron gutters could cause rotten fascias to fall causing damage or injury to property or persons below. If the building does not have fascia boards, contact your local builders merchant for advice on suitable support brackets, or contact our Technical Advisory Service.

Tools Required

Materials